| Specifications |
| Processor / Cache |
CPU |
 |
Single Socket |
|
Supports a Quad-Core Intel Xeon 3200 Series
processor |
|
Supports a Dual-Core Intel Xeon 3000 Series processor
| |
| System Bus |
1066 / 800 / 533 MHz system bus |
| Operating System Software |
|
Microsoft® Windows® XP Pro SP2 |
|
Microsoft Windows Vista® Ultimate |
|
Microsoft Windows Server® 2000/2003 32bit & 64bit |
|
Red Hat® Linux® 4 |
|
| System Memory |
Capacity |
|
Four 240-pin DIMM sockets |
|
Supports up to 8 GB of memory (Single / Dual Channel)
| |
| Type |
240-pin gold-plated DIMMs |
| DIMM Sizes |
256MB, 512MB, 1GB, 2GB |
| Voltage |
1.8V only |
| On-Board Devices |
Serial ATA |
|
Intel ICH7R SATA2 (3Gbps) controller built-in |
|
Intel: RAID 0, 1, 5, 10 support (Windows Only) |
|
Adaptec: RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only) |
|
| IPMI |
|
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN & optional KVMover-LAN support |
|
SIMSO Slot - Supermicro Intelligement Management |
|
Optional: AOC-SIMSO+ |
|
NOTE: Must use dedicated LAN for IPMI function |
|
Network
Controllers |
|
2x Single-port Gigabit PCI-Express Ethernet Controllers |
|
Intel 82573V + Intel 82573L |
|
Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
|
| Graphics |
On-board ATI ES1000 (16MB) graphics |
| Super I/O |
Winbond 83627HG chip |
Clock
Generator |
Clock Generator |
| Input / Output |
Serial ATA |
|
Four Serial ATA ports (3Gbps performance) |
|
Four SATA hard drives supported |
|
| IDE |
|
One EIDE channel supports up to two UDMA IDE devices |
|
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
| Floppy |
1 Floppy controller; 1.44MB |
| LAN |
2x RJ45 LAN ports |
| USB |
|
Up to 6x USB 2.0 / 1.1 compliant ports |
|
2 rear ports |
|
2 internal header for 4 USB 2.0/1.1 ports |
|
| VGA |
1x VGA port |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Ports |
|
1x Fast UART 16550 serial port |
|
1x internal header |
|
| Chassis |
Form Factor |
1u Rackmount |
| Expansion Slots |
Universal I/O |
|
1 Universal (UIO) slot |
|
Used in conjunction with Supermicro UIO Controller Card |
|
| PCI-Express |
|
2 (x8) PCI-e slot |
|
1 (x4) PCI-e slot |
|
| System BIOS |
BIOS Type |
8MB Flash EEPROM with Phoenix BIOS® |
| BIOS Features |
|
Plug and Play (PnP) |
|
DMI 2.3 support |
|
PCI 2.2 |
|
ACPI 1.0 |
|
SMBIOS 2.3 |
|
USB keyboard support |
|
| Management |
Software |
|
Super Doctor III |
|
Watch Dog |
|
NMI |
|
W83793G H/W Monitor |
|
| Power Configurations |
|
ACPI Power Management |
|
Main Switch Override Mechanism |
|
Wake-On-Ring (WOR) header |
|
Wake-On-LAN (WOL) header |
|
Power-on mode control for AC power loss recovery |
|
Internal/External modem remote ring-on |
|
| PC Health Monitoring |
CPU |
|
Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT) |
|
CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V |
|
| FAN |
|
Total of six 4-pin fan headers |
|
6x fans with tachometer monitoring |
|
Status monitor with firmware / software speed control |
|
Status monitor for on/off control |
|
Support 3-pin fans (with speed control) |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connector |
|
| Temperature |
|
Monitoring for CPU and chassis environment |
|
CPU Thermal Trip support |
|
Thermal Monitor (TM2) Support |
|
PECI |
|
| LED |
|
CPU / System Overheat LED |
|
Standby alert LED |
|
| Other Features |
|
Chassis intrusion detection |
|
Chassis intrusion header |
|
| Dimensions |
Height |
1.7" (43mm) |
| Width |
17.2" (437mm) |
| Depth |
25.6" (650mm) |
| Gross Weight |
42 lbs (19.1 kg) |
| Front Panel |
Buttons |
|
Power On/Off button |
|
System Reset button |
|
UID button |
|
| LEDs |
|
Power LED |
|
Hard drive activity LED |
|
2x Network activity LEDs |
|
System Overheat LED |
|
UID LED |
|
| Ports |
2x USB & DB9 COM port tray
Optional - in place of floppy drive |
| Drive Bays |
Hot-swap |
4x 3.5" Hot-swap drive bays |
| System Cooling |
Fans |
4x Counter-rotating fans |
| Power |
Voltage |
100 - 240V, 50 - 60Hz, 8.5 - 4 Amp |
| +5V |
25 Amp |
| +5V standby |
3 Amp |
| +12V |
43.6 Amp |
| -12V |
0.6 Amp |
| +3.3V |
21 Amp |
