| Specifications |
| Processor / Cache |
CPU |
Supports up to two Intel® 64-bit Xeon processor(s) of the same type Quad-Core Intel Xeon processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz |
| System Bus |
1333 / 1066 / 667 MHz system bus |
| Operating System Software |
 |
Red Hat® Linux® ES 3 (Update 4 & 5) |
|
MS® Win 2003 Server Standard Edition |
|
MS Win 2003 Server Enterprise Edition |
|
MS Win 2003 Server Enterprise Edition x64 |
|
SuSE® Linux® SLES 9.0 & +SP2 |
|
VMware® ESX 3 & 3.5 |
|
| System Memory |
Capacity |
|
Eight 240-pin DIMM sockets |
|
Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory |
|
Dual branch memory bus |
|
Memory must be populated in pairs |
|
Memory Mirroring supported |
|
| Type |
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
512 MB, 1GB, 2GB, 4GB |
| On-Board Devices |
Serial ATA |
|
Intel ESB2 SATA 3.0Gbps controller |
|
RAID 0, 1, 5, 10 support (Windows Only) |
|
RAID 0, 1, 10 support (Linux) |
|
| SAS |
|
Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller |
|
SAS Dual-Channel (internal) |
|
Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives |
|
Host RAID 0, 1, & 10 support |
|
| RAID |
Support for Zero-Channel RAID with optional card |
| IPMI |
|
Support for Intelligent Platform Management Interface v.2.0 |
|
200-pin IPMI slot (SIMLP) as option |
|
Network
Controllers |
|
Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
Intel I/OAT support for fast, scaleable, and reliable networking |
|
| Graphics |
ATI ES1000 controller with 16 MB of video memory |
| I/O |
Winbond 83627HG chip |
| Input / Output |
SAS |
|
Eight SAS / SATA (internal) ports |
|
Up to 8 SAS / SATA hard drives supported |
|
| Serial ATA |
|
Six Serial ATA ports |
|
Six SATA hard drives supported |
|
| IDE |
|
Single EIDE channel supports up to two UDMA IDE devices
(IDE-M, IDE-S) including CF (Compact Flash) card |
|
Compact Flash (40-pin connector, IDE 1, single channel) slot |
|
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
| Floppy |
1 Floppy controller: 1.44 MB, 2.88 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
|
2x USB rear ports |
|
3x USB internal headers |
|
Total 5 USB 2.0 Compliant / 1.1 Compliant |
|
| VGA |
1x VGA port |
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
Keyboard and optical mouse optional |
|
| Serial Port /Header |
|
1 Fast UART 16550 serial port |
|
1 Fast UART 16550 serial header |
|
| Chassis |
Form Factor |
2u Rackmount |
| Expansion Slots |
PCI-Express |
|
2 (x8) PCI-e slots |
|
1 (x4) PCI-e (using x8) slot |
|
1 SEPC (Supermicro PCI-e Power Connector) slot for 2u active riser cards with a power extension (i.e. CSE-RR2UE-AX) |
|
| PCI-X |
|
2x 64-bit 133MHz PCI-X (3.3V) slots |
|
1x 64-bit 100MHz PCI-X (3.3V) slot |
|
| System BIOS |
BIOS Type |
8MB Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
|
Plug and Play (PnP) |
|
SMBIOS 2.3 |
|
DMI 2.1 |
|
PCI 2.2 |
|
ACPI 1.0 |
|
USB Keyboard support |
|
Hardware BIOS Virus protection |
|
| Management |
Software |
|
Optional IPMI (Intelligent Platform Management Interface) 1.5/2.0 |
|
SuperDoctor III |
|
Watch Dog |
|
NMI |
|
| Power Configurations |
|
ACPI Power Management |
|
Main Switch Override Mechanism |
|
Wake-On-Ring (WOR) header |
|
Wake-On-LAN (WOL) header |
|
Power-on mode for AC power recovery |
|
Internal / External modem remote ring-on |
|
| PC Health Monitoring |
CPU |
|
Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V |
|
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
|
| FAN |
|
Total of four 3-pin and four 4-pin fan headers supporting up
to 8 fans |
|
8x fans with tachometer status monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connectors |
|
| Temperature |
|
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
Thermal Control for 8x fan connectors |
|
PSU I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
| LED |
CPU / System Overheat LED |
| Other Features |
|
Chassis intrusion detection |
|
Chassis intrusion header |
|
SDDC Support |
|
| Dimensions |
Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
25.6" (650mm) |
| Gross Weight |
53 lbs (24.0kg) |
| Front Panel |
Buttons |
|
Power On/Off button |
|
System Reset button |
|
| LEDs |
|
Power LED |
|
Hard drive activity LED |
|
2x Network activity LEDs |
|
System overheat LED / fan fail LED |
|
Power fail LED |
|
| Ports |
2x USB & DB9 COM port |
| Drive Bays |
Hot-swap |
8 x 3.5" Hot-swap SAS drive trays |
| Peripheral Drives |
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM drive |
| Floppy |
Slim 1.44MB Floppy Drive (Optional) |
| SATA / SAS |
Backplane |
1x SAS / SATA backplane |
| System Cooling |
Fans |
3x 80mm 6300 RPM fans |
| Shroud |
1x Air Shroud |
| Power |
Supply |
700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| Voltage |
100 - 240VAC, 50 - 60Hz, 8.5 - 4Amp |
